8
Mounting the exhaust outlet
• Tight with the screws
1
the part
2
to the air
cleaner outlet, selecting the desired direction of
the opening from the 4 possible sides.
To do this:
• Open the decorative panels
3
and remove the
metal filters
4
located behind them.
• Unscrew the 4 screws and remove the bar
5
.
• Unscrew the 8 screws and remove the motor
housing
6
.
• Turn the motor housing
6
to 90 °/ 180 °/ 270 °,
select the desired direction of the outlet
• Then fix the motor housing
6
with 8 screws,
mount the bar
5
, install the filters
4
and the
decorative panels
3
.
Adjustments of the housing:
After the mounting of the cooker hood's housing to the
mounting boards, to adjust the housing heightwise:
• Use a cross screwdriver or straight screwdriver to
release the fixing screw
7
.
• Turn the adjusting screw
8
clockwise to elevate
the corner of the cooker hood.
• Turn the adjusting screw
8
counterclockwise to
lower the corner of the cooker hood.
• Use a cross screwdriver or straight screwdriver to
tight the fixing screw
7
after the adjustments.
Each corner of the cooker hood can be adjusted in
range of 0 – 25 mm.
7
8
1
6
6
6
4
2
3
3
5
ATTENTION!
Before the beginning of the operation it is
obligatory to remove an adapter inside the cooker
hood.
EN
