36
1
1
5
4
2
3
EN
Grease filters should be cleaned every two months
during normal operation of the hood, in a dishwasher or
manually, using mild detergent or liquid soap.
To dismantle the filter
1
proceed as follows:
CARE AND MAINTENANCE
Regular maintenance and cleaning of the device will
guarantee its good and fault-less operation, and extend
its life. Attention should be paid to replacing grease and
charcoal filters according to manufacturer's
instructions.
METAL GREASE FILTER
Cleaning
Dismantling
• R
elease the lock catch
es
2
.
Charcoal filters can be used only when the cooker hood
is not connected to any ventilation duct.
Filters with a charcoal can absorb odours until they are
saturated. They cannot be washed or regenerated and
should be replaced at least every 6 months or more
frequently in case of very intensive use.
• Remove the metal grease filter.
Replacement of the filter
CHARCOAL FILTER
Operation
• Remove the metal grease filter
1
.
• Dismantle the old filter
3
situated on the engine
by rotating it counter-clockwise then install a new
charcoal filter.
For models
543 743
ЕА
*,
*
For models
ЕА 641*, 642*, 644*
• Fold the iron wire-holders
5
of charcoal filter
4
,
which is located on a metal filter
1
, install a new
charcoal filter, place iron wire-holders back.
• Remove the metal grease filter
1
.
