38
6
7
5
4
1
2
3
EN
• Release the cover
6
,
unscrew the screws and remove the decorative panel
and then remove the light block
•
5
Replace the lamp
or LED using a piece of cloth or
paper for that purpose,
or
Replacement of an
incandescent lamp
•
nscrew the
4
(if exist)
or,
U
ring
holding the lamp glass
if the ring has no threading, u
sing a flat tool or
screwdriver
and holding it, remove to the
extract it
,
outside,
•
7
Replace the bulb using a piece of cloth or paper for
that purpose,
• Fix the cover
6
.
Cooker hood with electronic control
Replacement
LIGHTING
Switching on/off of lighting occurs independent of work of the
engine. Press the button for Switching on/off the light. The
1
indicating light turns on/ off accordingly.
Cooker hood with slider control
The lighting switches on automaticaly by the e
of a
xtending
fume deflector – position
2
.
The lighting switches off
automaticaly by the pushing in of a
fume deflector – position
3
.
The lighting system consists of halogen lamps
or LEDs.
Attention!
Make sure that you do not touch the halogen
bulb to be installed with your bare fingers!
