34
EN
• Remove products from the cooling or
freezer compartments (as required);
• Switch it off and remove the plug
from the socket;
• Adjust the temperature setting
according to the volume of the
products placed in the two-
compartment refrigerator.
To take the refrigerator out of operation
for a longer period:
MAKING ICE CUBES
• Pull out the tray and remove the ice
cubes with the provided scoop.
• Fill the upper tank with water up to
the line and place the
IceMaker
in
the freezer. Set the freezer tempera-
ture to a lower level to make ice
faster.
SAVING ENERGY
IceMaker
• Turn the knobs on the front of the
IceMaker
to drop the ice cubes into
the tray.
• Do not place the refrigerator near
heat sources (electric heaters,
kitchen stove;
• While the freezer compartment is
being defrosted, transfer all of the
products to the cooling compart-
ment, so that the temperature of the
frozen products helps maintain the
temperature of the products in the
cooling compartment;
• Defrost the refrigerator if a layer of
ice forms, as this thick layer of ice
impedes the cooling of the products
being frozen and increases power
consumption;
• When loading and unloading
products, follow the principle: "doors
opened for a while"; this will limit the
formation of frost on the walls of the
freezer compartment's evaporator;
• Ensure air circulation around the
refrigerator; allow meals to cool to
room temperature before placing
them in the refrigerator;