Hidden networks (hidden SSIDs) are supported by the Sensedge. To connect,
tap on the “Additional Settings” button at the bottom of the list of available
networks, to enter the Add Network view. Enter the SSID, password, and select
the encryption used to connect.
Ethernet
When an Ethernet cable with an active internet connection is plugged into the
Sensedge, the device will automatically switch from Wi-Fi to Ethernet.
Screen
Used to adjust brightness of the screen, as well as the orientation. Orientation
may be set to face either up, down, or adjust automatically with the orienta-
tion of the device (recommended).
Language
Used to change the language of the device. A number of languages are sup-
ported, and may be modified at any point in time. Upon change of language
the device’s screen may briefly dim as the interface is reloaded.
Time
By default, the Sensedge is configured to automatically set the date and time
when connected to the Internet. For seamless capture and storage of air qual-
ity data, it is important to ensure the date, time, and timezone are set correctly
on the device.
If the Sensedge is used offline, without an Internet connection, please ensure
that the date and time settings have been manually configured to the correct
time.
Both 12h and 24h clocks are supported, and may be configured in this view.
Device Details
Used to display details including the unique ID of the device, the serial number,
and other manufacturing details.
Device Details > Firmware Version
