TUNE
I
N
S
TATIONS
TUNE
I
N
S
TATIONS
Auto
tuning
:
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Press and hold < > or < > for about 2
seconds, then release to auto tune into the
next available station. If the auto-tuned station
frequency is inaccurate, please use manual
tuning to find the accurate frequency point.
1. Turn on the radio and select [Radio] in Main
Jog
tuning
:
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Rotate <Tuning knob> and notice the frequency
changing in the display, stop rotating when the
radio receives a
satisfactory station.
1. Turn on the radio and select [Radio] in Main
89.8
FM
MHz
M005
Memory location
+
Auto search (ATS):
1. T
urn on the radio and select [Radio] in Main
Menu.
2. A
djust the volume to an appropriate level and
choose your desired band.
3. Press <MENU> to open the sub-menu and
select [Auto search], press <MENU> again to
start auto tuning and store all the available
stations into memory.
Memory Locations:
FM:
M001 - M440
AM
:
M001 - M132
SW:
M001 - M928
Direct frequency entry
1. Turn on the radio and select [Radio] in Main
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Input the frequency numbers that corresponds
to a station’s frequency by using the key board,
and then press the band button to enter the
station you need.
Memory recall
1. Turn on the radio and select [Radio] in Main
Menu.
2. Press <M+/EQ> or <M-/ > to select a station
that stored within the memory.
STORING STATIONS MANUALLY
Select your desired station, press <MENU> to
open the sub-menu and select [Save], press
<MENU> again to confirm. The stored station’s
memory location will be stored into the memory
by the order of the frequency from low to high.
11
12
