background image

kaivac

cleaning

systems

TM

P a g e   ǀ  

7

www.kaivac.com

©2020 Kaivac, Inc. All Rights Reserved

1.0  Getting Started

1.2 s

Afety

 p

ReCAUtions

: C

oRded

 (C

ontinUed

)

• 

High pressure cleaners shall not be used by children, persons with reduced physical, sensory or mental capabilities 

or lack of experience and knowledge or untrained personnel. Children shall not play with the appliance. Cleaning and 

user maintenance shall not be made by children without supervision. 

• 

This product may also have been provided with a ground fault circuit interrupter built into the power cord. If replace-

ment of the plug or cord is needed, use only identical replacement parts.

• 

Test the ground fault circuit interrupter (GFCI) before each use.

• 

Personal Protective Equipment (PPE): It is recommended to wear proper personal protective equipment as required 

by the chemical product label instructions used in conjunction with the appliance.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION 

(

for spray systems only)

This machine was supplied with a ground-fault circuit-interrupter(GFCI) built into the plug of the power-supply cord. This 

device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become 

necessary, use only identical replacement parts that include GFCI protection.
This appliance is for use on a nominal circuit and has a grounding attachment plug. Make sure that the appliance is 

connected to an outlet having the same configuration as the plug. No adapter should be used with this appliance.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for 

electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-ground-

ing conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and 

grounded in accordance with all local DOE and ordinances.

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified 

electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug 

provided with the appliance – if it will not fit the outlet have a proper outlet installed by a qualified electrician. 

FOR INDOOR USE ONLY

INTENDED FOR COMMERCIAL USE

WARNING — To Reduce the Risk of Electric Shock — Do not expose to rain. Store indoors.

Summary of Contents for COOLER CLEANER

































Reviews: