B Mode Ultrasonic Scanner
User’s Manual V1.00
- 13 -
6.3 Getting Started
1. Turn on the equipment: Press and hold the power switch
for 3-5 seconds until the battery
power indicator and wireless signal indicator icons appear on the display screen and then let go;
2. Connect to WLAN. Go to Settings, tap WLAN, open WLAN, the phone will search and list the
available WLAN;
3. In the available WLAN list, select W1 or W2 network ID, such as “W11702906”, connect to it;
4. After connected successfully, tap “B-Ultrasound” to enter the ultrasound interface, prompt “The
initialization data ends!”, then you can use the ultrasound APP.
Note:
1. You first turn on W1 or W2 equipment and then set up the phone’s WLAN. After WLAN
connection is successful, you must wait 5-6 seconds and then open the ultrasound APP.
2. The network ID of W1 or W2 equipment is the default number displayed on the shell of W1
or W2. For example, W1 shows “W11702806” or W2 shows “W21702906”.
3. When the network is disconnected, the wireless signal icons
on the equipment and the
phone are flashing, and the equipment will turn off automatically after 3 minutes.
6.4 Change the language for APP
1. Go to Settings, tap Language & input, tap Language and choose the used language;
2. After finish the settings, enter the ultrasound APP again, the ultrasound interface appears the
changed language.
Note: KAIXIN ultrasound APP supports Chinese and English. English chooses United States.
Other languages are not support.