B Mode Ultrasonic Scanner
User’s Manual V1.00
- 28 -
3. Check equipment after cleaning and disinfection
(1) Check the equipment enclosure to ensure they are free of abnormity (such as scuffing, cracks
or drop-off);
(2) The sound window of equipment is thin; ensure that there are no any abnormity on the sound
window, such as scuffing, cracks, peeling, bulge and drop-off.
4. Clean the display screen
Use a soft cloth dipped in glass cleaner to clean the display screen, and then air-dried.
12.2 Use and maintenance for the rechargeable battery
12.2.1 Use and replacement for the rechargeable battery
1. Only use battery provided by KaiXin Company.
2. The equipment has an internal rechargeable battery. Don’t attempt to replace the battery yourself; you
may damage the battery or the equipment. The battery should be replaced only by KAIXIN
authorized service personnel.
12.2.2 The maintenance for the rechargeable battery
1. Battery is consumable; the battery cycle-life is based on the times of charge and discharge as unit.
When the use time reduced significantly compared with normal conditions, the battery should be
promptly replaced.
2. The excess high or low temperature will affect the charging and discharging performance, and short
the battery life and capacity.
Attention:
Don’t throw away the exhausted battery anywhere; especially throw it in the
fire. Please deal with it according to local statutes. Use pollution degree II to deal with.
Attention:
Do not clean the screen with hydrocarbon detergent for example alcohol etc
or OA equipment cleaning media.
Attention:
Prohibit using sharp objects to touch the display screen, and prohibit pressing
or squeezing against the display screen.
Attention:
The battery charger should conform to the CCC or the country’s phone
charger standard requirements.