B Mode Ultrasonic Scanner
User’s Manual V1.00
- 31 -
Chapter 13
Storage and Transportation
Storage and Transportation
1. If the equipment is stored over 3 months, take out the equipment from the packing case, connect it to
power supply for 4 hours, and then disconnect the power. Place it in the case again following the
direction indicated by arrows on the package. Store the case in the warehouse. Do not pile the case. The
equipment case should have adequate space from ground, walls and ceiling of the warehouse.
2. Environment requirement
Ambient temperature: -20℃
－
55℃; Relative humidity: 30%
－
93% (without condensation);
Atmospheric pressure: 700hPa-1060hPa. The warehouse should be well ventilated and free of direct
sunlight and corrosive gas.
3. Shockproof measures have been taken inside the packing case to allow for transport by air, railway, land
and sea. The goods shall not be exposed to poor weather conditions like rain and snow, nor shall the
goods be placed upside down, bumped, knocked or over-stacked.
Chapter 14
Safety Classification
1. Classified according to electric shock protection type:
Class II, internally powered equipment
2. Classified according to electric shock protection degree:
Type B applied part
3. Classified according to the degree of protection against ingress of liquid:
Main unit belong to IPX4 equipment
4. Classified according to operation safety in condition of existence of flammable anesthetic mixture
with air or oxygen or nitrous oxide:
It is neither of category AP equipment nor of category APG equipment
5. Classified according to mode of operation:
Continuous operation equipment
6. Classified according to the protection of radio services:
Group I Class A equipment
