Operation Manual
3-IN-1/30
KAKA Industrial
®
- 1 -
Specifications
Stock No. ...................171003
Effective Width............760mm (30 inches)
Maximum
Shearing Thickness…..1mm (20 gauge)
Bending Thickness……1mm (20 gauge)
BendingAngle...............90°
Rolling thickness………1mm (20 gauge)
Roll Diameter………….39mm (1-1/2
inches)
Packing dimensions…. 990x440x680mm
(39x17x27 inches)
Net weight....................127KGS (280 lbs.)
Unpacking
The SHEAR / BRAKE / ROLL 3-IN-1/30 is
shipped from the manufacture in a
carefully packed ply-wood case.
Carefully open crate and unbolt brake
from shipping pallet and remove from
crate using heavy duty lifting equipment
such as an overhead crane.
Thoroughly inspect the product upon
opening the package. After unpacking the
unit, carefully inspect for any damage that
may have occurred during transit.
If damage has occurred, shipping
damage claims must be filed with the
carrier and are the responsibility of the
user.
Check for completeness. Immediately
report missing parts to dealer.
Warning
The warnings, cautions and instructions
discussed in this instructions or situations
that could occur. It must be understood by
the operator that common sense and
caution are factors which cannot be built
into this product, but must be supplied by
the operator.
SAVE THESE INSTRUCTIONS
Thank you for purchasing 30-inch
Shear/Brake/Roll
machine.
Before
attempting to operate your new tool
please read these instructions thoroughly.
You will need these instructions for the
safety warnings, precautions, assembly,
operation,
maintenance
procedures,
parts list and diagrams. Keep your invoice
