Operation Manual
YP-38
KAKA Industrial
®
- 1 -
Warning
The warnings, cautions and instructions
discussed in this instructions or
situations that could occur. It must be
understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
Specifications
Stock No. .....................................173214
Height...................................................38”
Mild Steel Capacity................5/16”x1-1/4”
or 1/4” x 2”
Right Angle Bending Capacity...........3/16”
x 1-1/4” or 1/4” x 1-1/4”
Center Pin Capacity...................1/4
”
thick
(use 1
”
die for greater)
Solid Rod Capacity............1/2
”
(use 3
”
die)
Die Sizes.............1
”
,1-1/4
”
,1-1/2
”
,1-3/4
”
,
2
”
,2-1/2
”
,3
”
Bending Angle….............................0-200°
Packing dimensions…...880x265x265mm
(34 5/8x10 7/16 x10 7/16 inches)
Net weight.....................19.5KGS (43 lbs.)
Unpacking
The COMPACT BENDER Y-P38 is
shipped from the manufacture in a
carefully packed Carton box. Thoroughly
inspect the product upon opening the
package. After unpacking the unit,
carefully inspect for any damage that may
have occurred during transit.
If damage has occurred, shipping damage
claims must be filed with the carrier and
are the responsibility of the user.
Check for completeness. Immediately
report missing parts to dealer.
SAVE THESE INSTRUCTIONS
Thank you for purchasing our YP-38
Compact Bender. Before attempting to
operate your new tool please read these
instructions thoroughly. You will need
these instructions for the safety warnings,
precautions,
assembly,
operation,
maintenance procedures, parts list and
diagrams. Keep your invoice number with
these instructions. Write the invoice
number on the inside of front cover. Keep
the instructions and invoice in a safe, dry
place for future reference.
