Operation Manual MUB-1
KAKA Industrial
®
— 1 —
Unpacking
The UNIVERSAL BENDER is shipped from
the manufacturer in a carefully packed Carton
box. Thoroughly inspect the product upon
opening the package.
After unpacking the unit, carefully inspect for
any damage that may have occurred during
transit. Check for loose, missing, or damaged
parts. Shipping damage claims must be filed
with the carrier and are the responsibility of
the user.
Specifications
The KAKA UNIVERSAL BENDER is the
perfect addition to any fabricator’s work bench.
It is precision designed and manufactured to
allow for quick and easy wire, flat metal and
tubing into clamps, handle brackets, hooks,
coils, and more. Make sharp angle bends in
wire and rod. Includes circle pins for 3/16",
1/4",1/2" dia, cirle 1" diacircle die, form pin
follower, sharp angle die, gauge and handle
Stock No. ............................................173207
Model....................................................MUB-1
Packing size.............13"x4"x4" (32X10X10 cm)
N.W./G.W..........................6.2/6.6 lbs (2.8/3 kg)
SAVE THESE INSTRUCTIONS
Thank you for purchasing our MUB-1
UNIVERSAL BENDER machine. Before
attempting to operate your new tool please
read these instructions thoroughly. You
will need these instructions for the safety
warnings, precautions, assembly, operation,
maintenance procedures, parts list and
diagrams. Keep your invoice number with
these instructions. Write the invoice number
on the inside of front cover. Keep the
instructions and invoice in a safe, dry place for
future reference.
General Safety Information
CAUTION
Always follow proper operating procedures
as defined in this manual even if you are
familiar with use of this or similar tools.
Remember that being careless for even a
fraction of a second can result in severe
personal injury.
SAFETY RULES
1. Wear proper apparel. Do not wear loose
clothing, gloves, neckties, rings, bracelets or
other jewelry which may get caught in moving
parts of machine.
2. Wear protective hair covering to contain
long hair.
3. Wear safety shoes with non-slip soles.
4. Wear safety glasses complying with United
States ANSI Z87.1.
Everyday glasses have only impact resistant
lenses. They are NOT safety glasses.
5. Be alert and think clearly. Never operate
tools when tired, intoxicated or when taking
medications that cause drowsiness.
6. Keep work area clean. Cluttered work areas
invite accidents.
7. Work area should be properly lit.
8. Keep visitors at a safe distance from work area.
9. Keep children out of workplace. Make
