Operation Manual
W-2416Z
KAKA Industrial
®
- 13 -
TROUBLESHOOTING
FAULT
PROBABLE CAUSE
REMEDY
INACCURATE
BENDS
Fingers are not aligned
Setback distance is not
equal from one side to the
other
Clamping assembly is not
holding piece part securely.
Follow proper finger
alignment procedure.
Accurately measure
distance and set
accordingly.
Re-adjust the clamping
pressure.
BENDING
LEAF HARD
TO LIFT AND
BEND.
Exceeding the bending limits
of the brake.
Counterweight is not on leaf.
Do not bend material
thicker than the machine
was designed for.
Attach the counterweight to
lessen force needed to lift
bending leaf.
