2
The machine should be installed in
a well-ventilated place.
The longitudinal knifes should not
be used with documents which are
not laminated paper (rigid sup-
port...).
Disconnect the general supply of
the machine with the switch (
item
21
) after each use.
During the assembly of the machi-
ne, be careful with the quartz hea-
ter and the ground areas (vibra-
tions). If the machine must be dis-
assembled, call a technician.
Do not touch the socket with damp
hands.
To unplug the machine, disconnect
the plug without pulling on the sup-
ply lead.
To prevent electric shocks, do not
use this laminating machine close
to water.
Make a working area behind the
machine.
Do not spill water on the machine,
the supply lead or the electric soc-
ket.
Do not use the machine if the sup-
ply lead is damaged.
Do not leave the electric lead in
contact with a warm surface.
The tension of your machine cor-
responds with the tension of your
electrical network.
The machine’s supply needs to be
placed at disposal of a stand base
of a compatible electric socket
CEI
60309-1
.
I
NSTALL THE
S
IROCCO ON A STABLE WORKING BASE
,
CLOSE TO AN EASILY
ACCESSIBLE ELECTRIC SOCKET
.
The supply connections must be
congruent with the installation
rules of the standard
NFC 15 100
.
C
HECK THAT
:
Summary of Contents for Sirocco 1080
Page 47: ...39 NOTE...
