USER MANUAL STARTER
11
TRANSLATED FROM ORIGINAL VERSION: EDITION 1
5. ADJUSTMENTS AND RECOMMENDATIONS
When maximum pressure level is reached, the LED pressure indicator light (Rep.12) turns to red
and the mechanism is locked to prevent any damages due to trying to apply to mu ch
pressure on the mechanism.
To decrease pressure, turn the roller elevation handle (Rep. 3) anti-clockwise.
To increase pressure, turn the roller elevation handle (Rep. 3) clockwise.
5.4 Film tension adjustment
The roll film tension adjustment handles
(Rep.7) and (Rep 8) enable to adjust the
tension of the film reels on the self blocking
shafts.
For a perfect lamination result, the film,
without folds, should be in contact with the
roller.
It
is
recommended
to
avoid
unnecessary tension on the film. Only tests
will enable you to set the right tension
depending on your films and application.
If folds appears on the surface of the film,
increase the tension slightly to remove them.
To increase the tension, turn the brake
handles (Rep.7) or (Rep.8) clockwise.
5.5 User safety
Starter laminator has got 2 security devices
which automatically stop the rollers :
- Driving the rollers can only be done with the
foot pedal. Lifting off the foot from the foot
pedal switches automatically driving off.
- Emergency stop button (Rep.D) : located at
the right hand side of the machine, above the
control board. Pressing this button will
instantly stop the machine.
7
8
+
+
