background image

Calibur DSR 

4-2 

0150-0163f 

Main Menu 

 Time/Date 

 Set Time 

Time Setup 

HH MM SS 

03 05 53 

[CANCEL]  [OK] 

To set the Time: 

1. 

With 

HH MM SS

 highlighted, press the 

Enter

 button.  The 

highlighting will move to the row of numbers. 

2. 

Enter the time in Hours, Minutes, and Seconds.  Use the 

Jog

 to 

change the values.  Use the 

Shuttle

 to navigate among the 

three fields. 

3. 

Press the 

Enter

 button to confirm the selection. 

4.  To Save the changes and Exit the menu:

 Use the 

Jog

 to 

select 

[OK]

, then press the 

Enter

 button. 

--OR-- 

5.  To Exit the menu without making changes: 

Use the 

Jog

 to 

select 

[CANCEL]

, then press the 

Enter

 button.

 

 

 

Main Menu 

 Time/Date 

 Set Date 

Date Setup 

MM DD YY DAY 

12 17 00 SUN 

[CANCEL]  [OK] 

To set the Date: 

1. 

Press the 

Enter

 button.  The highlighting will move to the row of 

numbers. 

2. 

Enter the date in Months, Days, Years.  Day of the Week will 
update automatically.  Use the 

Jog

 to change the values.  Use 

the 

Shuttle

 to navigate among the three fields. 

3. 

Press the 

Enter

 button to confirm the selection. 

4.  To Save the changes and Exit the menu:

 Use the 

Jog

 to 

select 

[OK]

, then press the 

Enter

 button. 

--OR-- 

5.  To Exit the menu without making changes: 

Use the 

Jog

 to 

select 

[CANCEL]

, then press the 

Enter

 button.

 

 

4.2 

Main Menu 

 Alarms 

Alarms Menu 

Hardwire Alarm :  

Enable

 

Teletext Alarm :  Disable 

Alarm Buzzer   :  Enable 

    [CANCEL]   [OK] 

Use this menu to specify: 

• 

Whether an alarm condition will be activated when the 
unit detects a signal on the Alarm In connection. 

• 

Whether a teletext alarm signal (generated by a 
multiplexer or other device) will cause the unit to 
activate an alarm condition. 

• 

Whether the internal buzzer is activated during an 
alarm condition. 

 

A feature unique to the DSR is its ability to detect alarms via teletext provided within the video signal.  
Standard Time Lapse VCRs can only detect an alarm if the alarm output signal of the Mux is wired 
directly to the alarm input of the VCR using the VEXT connection. 

Summary of Contents for Calibur DSR-2000e



























































Reviews: