0150-0193A 41
Calibur
DVMR
e
Triplex
Macro Excluded Features
The following core features or settings cannot be programmed by Macro.
•
Disk Maintenance.
•
Erase Archive Medium.
•
POTS Setting.
•
Ethernet Setting.
•
RS485 Network Address.
•
Front Panel Lock/Unlock.
Main Menu
→
Macro
→
Timed Macro Start
Use this menu to program scheduled start times for macros. Up
to 20 scheduled start times can be programmed in this menu.
Event:
Select the scheduled start event you wish to edit.
Day:
Select the start day (
Monday – Sunday
) of the macro.
Select
**
(double asterisks) to run the macro every day.
Select
None
to cancel the scheduled start time.
Time:
Select the start time for the macro.
Macro:
Select the desired macro number.
A form is provided in section 9 to keep track of scheduled macros.
Main Menu
→
Macro
→
Edit Submacro
A submacro is an RS232 command string used to control a peripheral device. Submacros are
activated during macros. See the table on page 40 for information about programming a macro to
activate a submacro.
Select the submacro you wish to edit from the menu system. This menu will appear.
Edit Submacro 01
ENTER key starts Submacro edit
080
066 066 010 --- --- --- --- --- ---
[P] [B] [B] [0]
[CANCEL] [OK]
Use this menu to create the RS232 command string. Press the
Enter
button to Enter and Exit the
submacro edit mode. Rotate the
Jog/Shuttle
to navigate among the fields and change the values.
Each byte value can be set from 0 to 255.
Timed Macro Setup
[CANCEL] [OK]
Event :
Day : Monday
Time : 00:00
Macro : 01
01
Summary of Contents for Calibur DVMRe Triplex
Page 74: ...0150 0193A...
