Kalatel DSR-1000eZ
1-4
0150-0238B
1.7 Back Panel Connections
Figure 1-3 Back Panel
6
1
2
4
5
3
7
1. I/O Port:
For connecting peripheral devices such as alarm devices, alarm relays, or the VEXT
connection.
2. RS-232 Serial Port:
Serial port for Flash Upgrading of software. Also for external control of
unit.
3. Ethernet Port (Optional):
For viewing Live or Recorded images on a PC via the Ethernet.
4. Power Connector:
Connect 12 Volt DC external power supply.
5. SCSI Port:
For connecting an SCSI compatible archive device.
6. Audio In (Optional):
RCA jack, 315mV, 40k Ohms. Unbalanced.
Audio Out (Optional):
RCA jack, 315mV, 600 Ohms. Unbalanced.
7. Video In:
Composite video input with BNC style connector.
Video Out:
Composite video output with BNC style connector.
Ethernet Port (Ethernet models only)
Wire Type:
CAT5
Connector Type:
RJ-45
Max Cable Length:
100 feet / 30.5 meters
Minimum Cable Length:
6 feet / 1.8 meters
Hub Wiring Configuration:
Straight Through
PC Wiring Configuration:
Cross Over
The cable connection configuration depends on your
network configuration:
•
For a DSR-1000eZ that connects directly to a
Hub, use a Straight Through connection.
•
For a DSR-1000eZ that connects directly to a
PC, use a Cross-over connection.
Consult with your MIS personnel for the specific type
of configuration. See section 5.5 Advanced Menu
→
Communications for information about configuring
the ethernet settings in the menu system.
