0150-0238B
4-3
Kalatel DSR-1000eZ
o
Main Menu
→
Time/Date
→
Set Region
Use this menu option to set the region for the Auto
Daylight Savings Time feature. Choices are:
•
OFF
: Clock will not be changed automatically.
•
USA
: DST starts at 02:00 on the first Sunday in
April. DST ends at 02:00 on the last Sunday in
October. Includes: United States (except Hawaii,
American Samoa, Guam, Puerto Rico, Virgin
Islands, parts of Indiana and Arizona) and
Canada (except Saskatchewan).
•
EUR
: DST starts at 01:00 GMT on the last
Sunday in March. DST ends at 01:00 GMT on
the last Sunday in October. Includes: European
Union Countries.
•
AUS
: DST starts at 02:00 on the last Sunday in
October. DST ends at 03:00 on the last Sunday
in March. Includes: South Australia, Victoria,
ACT, NSW. Excludes: Tasmania.
Daylight Saving :
Time Zone :
SUN, 6 APR 2003 02:00 (+1)
SUN, 26 OCT 2003 02:00 (-1)
GMT+07:00
USA
Regional Settings
[CANCEL] [OK]
The clock will only be automatically adjusted once on a given time and date. If you manually set the
clock back before the last DST change, the time will not get automatically adjusted again for that same
time change.
q
Main Menu
→
Time/Date
→
Network Time Setup
Use this menu to enable/disable and specify how often time synchronization should occur between the
DSR and the Network Server. The Region /Time Zone must be setup prior to enabling the option.
Update Interval,
Select from: Enable, Disable, Once per Day, Twice per Day, and Once per Hour
NTP Primary Server:
Enter IP Address of Primary Server.
NTP Backup Server:
Enter IP Address of Backup Server.
1. To save changes and exit the menu: Select
[OK]
, then press the
Enter
button.
2. To exit the menu without making changes: Press the
Menu
button, or select
[CANCEL]
, and then
press the
Enter
button.
Network Time Protocol Setup
Last Update: Never Since Power-up
Warning: Region/Time Zone must be set correctly!
Update Interval :
NTP Primary Server : 3. 37. 8. 26
NTP Backup Server : 0. 0. 0. 0
DISABLE
[CANCEL] [OK]
