Kalatel DSR-1000eZ
4-4
0150-0238B
4.2 Main Menu
→
Alarms
Alarm Settings
Hardwire Alarm :
Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL] [OK]
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether a teletext alarm signal (generated by a
multiplexer or other device) will cause the unit to
activate an alarm condition.
•
Whether the internal buzzer is activated during an
alarm condition.
A feature unique to the DSR-1000eZ is its ability to detect alarms via teletext provided within the video
signal. Standard Time Lapse VCRs can only detect an alarm if the alarm output signal of the Mux is
wired directly to the alarm input of the VCR using the VEXT connection.
This teletext alarm detecting feature of the DSR-1000eZ is compatible with the following styles of
Multiplexers:
•
Kalatel
•
Philips
•
Robot
•
Pelco
•
Sanyo
•
Philips REO
•
ATV
•
ATV QSP
•
Vista VLM
•
QSI 1700
•
Diebold
•
Panasonic
Connecting to Dedicated Micros (DM)
When connecting to a Dedicated Micros multiplexer:
•
It is necessary to connect the alarm output of the Mux to the alarm input of the DSR-1000eZ (as
you would do when connecting the alarm input on standard time-lapse VCR).
•
It is necessary to configure the
Main Menu
→
Alarms
→
Hardwire Alarm
as
Enabled.
•
It is necessary to configure the
Main Menu
→
Alarms
→
Teletext Alarm
as
Disable.
Alarm Settings
Hardwire Alarm : Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL]
[OK]
To configure the alarm settings:
1.
Use the
Shuttle
to navigate among the fields.
2.
Use the
Jog
to change the values of the highlighted
fields.
3. To Save the changes and Exit the menu:
Use the
Jog
to select
[OK]
, then press the
Enter
button.
--OR--
4. To Exit the menu without making changes:
Use the
Jog
to select
[CANCEL]
, then press the
Enter
button.
