Kalatel DSR-1000eZ
5-6
0150-0238B
before attempting to make any changes. It is strongly recommended that the modem initialization
string only be modified by a qualified technician.
To enable modem communication select
enable
in the
Modem Status
field.
To modify the modem settings follow the steps below.
Modem Settings
Modem Init String : AT&
F1&K3M0E1Q0V1S0=0&R2&C1&D0&H1
Modem Status : DISABLE
[Default Modem String] [CANCEL] [OK]
1.
With the Modem Init String highlighted, press the
Enter
button to enter the Edit mode. The character
bank will appear in the center of the menu.
2.
Press the
Sequence
button to select the desired character bank.
3.
Rotate the
Shuttle
to navigate the Modem Init String.
4.
Rotate the
Jog
to select a character from the character bank.
5.
Use the
Number 2
button or rotate the
Shuttle
to insert the desired character from the character
bank into the Modem Init String and advance to the next character.
6.
Use the
Number 1
button to insert a blank character.
7.
When finished, press the
Enter
button.
8.
To save the changes and reboot, select
OK,
then press the
Enter
button. The unit will only reboot if
changes were made to the Modem Init String.
9.
To exit the menu without making changes, select
Cancel
, then press the
Enter
button. Pressing the
Menu
button also exits the menu without making changes.
