Kalatel DSR-1000eZ
6-4
0150-0238B
6.2 DSR WaveLink
A new feature with DSR software version 2.07 is the DSR WaveLink. This feature allows putting
command codes in the URL when calling WaveBrowser to control actions the WaveBrowser is going to
perform.
This feature can be used by Web Developers to link various cameras to specific Web content.
6.2.1 Functionality
The traditional WaveBrowser URL is
http://<IP_Address>/wrcontrollite.ssi
. This URL will start the
WaveBrowser in the disconnected state. DSR software version 2.07 supports command codes placed
after an underscore after
wrcontrollite
and before
.ssi
. In the following example, the options are in bold.
Example: http://3.18.172.230/wrcontrollite_
c=1s=2a=3t=1361959858
.ssi.
The following table specifies the supported options:
Name
Code
Description
Example
Camera
c=<n>
Describes either the camera number for
fullscreen (1=Camera 1, …16=Camera 16)
or the type of the multiscreen display (100 =
Multiscreen 16 large, 101= Multiscreen 16
small, 102= Quad screen)
c=10
Size
s=<n>
For fullscreen camera, describes the size of
the display (1=large, 2 =medium, 3= small)
s=2
Action
a=<n>
Describes the action the WaveBrowser has
to take:
0 No action
1 Normal Connection Play
2 Normal Connection Live
3 Normal Connection Goto
4 Live Connection
a=2
Time
t=<n>
When action is set to 3 (Goto), the time
specifies where to go in number of seconds
since 01/01/1960.
t=1361959858
Please Note: When an option is not specified, it will be set to 0.
When a normal connection is requested, but the unit is already connected via a normal
connection, the WaveBrowser should open a live connection instead.
The default page,
http://<IP_Address>
, does not accept option codes and will open the WaveBrowser in
disconnected state.
The example URL from above
http://<IP_Address>
/wrcontrollite_
c=1s=2a=3t=1361959858
.ssi) requests
the WaveBrowser to make a
normal connection
,
play back at 2/27/2003 10:53:32
displaying
camera 1
in
medium size
.
NOTE
