(Placed Fake Number System)
(Voice Control Function)
1. Open the battery cover in the internal body and press the button once. (A
"Beep" sound is heard.)
2. Press the number "0" on the number panel on the outer body twice.
3. To delete, press "*" button.
• When the card is deleted, the current registered card is completely deleted.
• Then, the card to be used must be registered again.
• Temporary program error can be resolved and normal operation can be resumed.
Usage:
Press the reset button with a pointed object.
* Pin code is not changed by this process.
• Easy function to automatically lock the door in a second after closing the door.
Automatic mode:
Press the Enter button once
□
# button
□
enter button once
("ding-dong-dang" sound)
-Manuel mod:
Press the Enter button once
□
button
□
Enter button once ( "beep" sound)
• Automatic lock duration can be changed between 2 to 9 seconds.
• Press Enter button
□
"8" button
□
desired period of time ( "2" ~ "9" buttons)
□
"*" button.
•Protection Function Against Passcode Disclosure
Eliminate the risk of revealing the password by adding fake number function.
• The use of fake number function
Before entering the passcode, randomly press the number buttons without any limits and then
enter the passcode, so the passcode will be hidden.
• Opening doors from the outside using the passcode
1. Touch the screen with your fingers to have the lights of the numbers turn on.
(A "Beep" sound is heard and the lights of the number panel turns on)
2. Enter the passcode.
3. The door will open when the "*" button is pressed.
When the door is not normally closed, the machine will attempt to lock
three times and a "beep" sound will be heard.
* A sound is heard to inform you about the error.
In lock latch errors, the outer alarm light turns on.
When the door is forced to open from outside, the emergency alarm is
activated for a duration of 1 minute and warns you about a forced entry
attempt from outside.
* Enter the passcode or insert the RF card and the alarm will be silenced.
Press the Enter button
□
"1" and "3" buttons
□
"*" button
□
"1" button a few times for low level, or "3" button a few times for high
level
□
"*" button.
• External double lock (to prevent thieves from entering during the gap)
When the external double lock is set, the door will not open even when the On/Off
button is pressed from inside.
* Setting: Touch the screen with your fingers to turn on the lights of the numbers
and press the "#" button for 5 seconds. (A Ding-dong-dang sound is heard.)
* Cancellation: To deactivate this function, unlock the door once using the
passcode.
• Closing the door from outside
Automatic mode: Close the door and after a second, the door will be locked automatically.
Manual mode: Touch the screen with your fingers and press # button to lock the door.
• Closing the door from inside
Automatic mode: Close the door and after a second, the door will be locked automatically.
Manual mode: Press the Open/Close button to lock the door.
* The Manual control device should be used only for fire or emergency situations.
17
KD-070/50 SERIES
KD-070/50 SERIES
KALE ELECTRONIC GLASS DOOR LOCK
KALE ELECTRONIC GLASS DOOR LOCK
16
After 5 incorrect passcode entries, the product will not work for a duration of 1 minute
When the product is in non-working state, you should not use if for one minute.
• Opening the door from the outside using the card
Touch the registered card to the card reading part on the outer body.
"Ding-dang-dong" sound is heard and the door opens.
• Opening the door from inside
Press the Open / Close button to open the door.The manual operation mechanism
should only be used in case of fire or emergency situations.
9 - OPENING THE DOOR
11 - DOUBLE-LOCK FUNCTION
8- CARD/TAG ERASING
13 - AUTOMATIC/MANUAL LOCK SETTINGS
14 - PROTECTION AGAINST PASSCODE DISCLOSURE FUNCTION
15 - LOCK FAILURE CONTROL
17 - VOLUME CONTROL FUNCTION
12- RESET FUNCTION
10 - CLOSING DOOR
(Warning Function)
16. THEFT AND MALICIOUS ACTION ALARM FUNCTION