13
Dual Unit Installation
1. Place two Strato C Movie Players upside down on a soft, clean and slightly
elevated surface.
2. Remove and keep the three screws visible on the bottom of each Strato C
Movie Player:
3. Place the rack shelf over the units. Note the appropriate sets of holes to be
used in the diagram below. Orient the shelf so the mounting holes are lined
up with the holes in the players where the screws were removed. Move the
shelf into position as required by the installation. In the frontmost position
the player faces will protrude by ¾” (recommended). In the rearmost position,
the faces of the players are flush with the front of the rack ears. Install the
saved screws: