background image

13

3.  Description

The following sections describe the 
gas fire:
-     Description of the gas fire. 

3.1  Gas fire description

Kalfire gas fires are internationally 
renowned for their realistic, enchanting 
flames.  Kalfire appliances are easy 
to operate and maintain. Kalfire 
balanced-flue gas fires are equipped 
with an innovative Prestige or 3D 
burner, enhancing their environmental 
friendliness, sustainability and 
economy.

Balanced­flue gas fires

The patented Prestige burner radiates 
a realistic impression of wood fire. 
The Prestige burners are integrated 
in the ceramic log sets stacked in 
the appliance in pyramid form. This 
creates the impression of a high and 
voluminous flame pattern. 

The Kalfire GP can be delivered with 
the Natural Spark Generator (optional). 
This ensures that sparks emanate from 
the burning flames in a natural manner, 
and continue to burn slowly. This spark 
generator option is mounted inside the 
gas fire during manufacture by Kalfire 
and cannot be added at a later stage.

The Kalfire GP can also be delivered 
with an optional hybrid function. The 
gas fire’s fuel bed is equipped with LED 
lighting that simulates a bed of natural 
embers. The lighting generates an 
atmospheric imitation of the glow of a 

real wood fire. The hybrid function can 
also be switched on separately without 
engaging the Prestige burner.

The Kalfire G with a 3D burner 
generates an elongated and horizontal 
flame pattern, well suited to a modern 
household interior. The 3D burner offers 
a particularly attractive and true-to-life 
flame pattern. Kalfire G gas fires are 
delivered with a standard or optional 
luxury ceramic log set, white stones, 
grey pebbles or cryptonite.

Smooth transition between gas fire 
and surround

The balanced-flue gas fires are easy 
to align with the household interior 
during installation. The gas fire stone, 
often made from natural stone, can 
continue along the outer edge of the 
gas fire with the help of stone supports. 
The side walls can be fluidly finished in 
the surround of the gas fire. The back 
wall can be extended to outside the gas 
fire, meaning the metal lining remains 
invisible. 

Operation

If the house is equipped with a home 
automation system, then operation of 
the appliance can be integrated into 
that system.

Summary of Contents for G80/48F





































Reviews: