9
4
Using the iMatch remote control
The iMatch remote control uses a radio-frequency signal (RF signal) to
relay information to the fire. The range of the signal is around 10 metres,
but may be less if obstacles such as walls or furniture are between the
fire and the remote control. An RF signal is particularly safe; however, it
can sometimes result in a longer reaction time, so the fire may not
respond instantaneously. If the screen of the remote control illuminates
after a button is pressed, this indicates that the RF signal has been sent.
4.1
Inserting the batteries
A battery compartment at the back of the remote control holds two AA batteries (these are
supplied with the appliance). Slide the battery cover downwards to open the compartment.
Insert the two batteries according to the diagram at the bottom of the compartment. The
display on the front of the remote control should then light up when the
button is
pressed.
