KALI AUDIO IN-Series Studio Monitor User’s Guide
10
Inputs and Controls
Volume Control
The volume control allows users to adjust the output of the speaker from -∞ to +6
dB. There is a center detente at the +0 dB setting, and this is where Kali recom-
mends you leave the volume setting, adjusting the level instead from your device.
Two notable exceptions to this recommendation are:
1. If you are working in an asymmetrical room, it may be necessary to have
one monitor louder than the other to achieve balance.
2. If your playback device does not have an independent volume control, it
will be necessary to adjust the volume directly from the speaker.
Power Input
Connect the provided power cord to this input. The IN-Series speakers have an
international switch-mode power supply, so there is no need to set the speaker for
your local voltage
On/Off Switch
Power the speaker on and off. Be sure to power the speaker off when connecting
or disconnecting the power cable, during lightning storms, or during extended
periods of disuse.
