To Restore your game profiles:
1. Press the Library tab at the bottom of the K2 App screen.
2. Press your account icon in the upper left hand corner of the app screen.
3. Press the Restore My Last Update icon.
Note: the Restore function adds any profiles missing from your device since your last Backup, and
overwrites any current profiles on your device with the version from your last Backup. If you have
added new profiles since your last Restore, they will be unaffected. The Restore function also
makes it easy to keep your profiles current across multiple devices if you start each session with a
Restore.
Controller Crossover Function
The KeyMander 2 supports controller crossover function to interchange OEM (factory-supplied) controllers
between game systems. You can share original Xbox One, PS4 or Nintendo Switch controllers between all
three game systems.
To connect and use a controller from a different console on your system:
1. For Xbox One and PS4 users connect your
OEM controller to the Gamepad Port. Nintendo
Swich users do not need to connect a controller
to the Gamepad Port.
2. Connect the controller you wish to use to the
Keyboard Port.
•
The profile will automatically switch to F4
Crossover Mode when the controller is
connected to the Keyboard port.
Firmware Update
The KeyMander 2 supports both OTA (over-the-air) and PC connection updates. Under most
circumstances firmware updates will be performed using standard OTA update function found in the
K2 App. There may be times however, when you wish to load a specific firmware that is not hosted on
our OTA update server (beta firmware builds), so the Firmware Update by PC method is explained
below.
To Update Firmware Using a PC:
1. Download the firmware .exe update file to your PC.
2. With the KeyMander 2’s Power and USB cables unplugged, press and hold BTN1 and BTN2 together.
3. While holding BTN 1 and BTN 2 plug the KeyMander 2’s USB connector into the PC and continue holding
both buttons for approximately 8 seconds.
•
The LED light will turn white and cycle from left to right to indicate it is in firmware upgrade mode
4. On the PC double click the firmware .exe file.
5. When the Firmware Upgrade Utility opens select “I Agree” and click next.
