Note: Xbox One users MUST connect to a USB on the back of the console.
5. To activate the KeyMander 2, power on the console.
K2 App Installation and Setup
Image 1
Image 2
Image 3
1. Download and install the K2 App from the App Store or Google Play store. Type in KeyMander 2 into the
search bar and it should find the K2 app for you to download.
2. Accept the location permission request or the BLE pairing to KeyMander 2 will not connect.
3. Create a KeyMander account and login to get started.
Note: Your KeyMander 2 account allows access to the KeyMander 2 Game Center and KeyMander 2 cloud
to store or retrieve your saved profiles.
4. Press the Bluetooth Pairing Button (BTN1) to put KeyMander 2 into pairing mode.
5. In the K2 app, press the Device tab on the lower right corner of the screen, then press the green “connect”
button. [
Image 1
]
6. On the Connect Device screen select IOGEAR GE1337P2 and wait for the pairing to complete. [
Image 2
]
7. Once pairing is complete the KeyMander 2 icon will show Connected beneath it, and the red “disconnect”
button is available to manually disconnect from KeyMander 2. [
Image 3
]
8. If your KeyMander 2 LED is flashing red or you get a low voltage notice on the K2 App, you need to add an
additional power supply. (not included).
