1. Prepare the Site
NOTE:
Make sure the floor will support a minimum of 1140 lbs. (517 kg). This is the combined weight of
the water-filled bath with one bather.
Make sure the flooring offers adequate support for your bath.
Verify the subfloor is flat and level.
For Drop-in or Raised-Deck Installations:
Frame the floor or construct 2x4 or 2x6 stud framing according to the roughing-in information.
Ensure there is a 1/16
″
(2 mm) gap between the finished deck/floor surface and the rim so the bath
will not rest on the rim. Carefully lay out and cut the rough deck material.
For Freestanding Installations:
Install the finished flooring and wall materials.
For All Installations:
Position the plumbing according to the roughing-in information.
Cap the supplies, and check for leaks.
31-1/2"
(800 mm)
15"
(381 mm)
34-7/16" (875 mm)
2-3/4"
(70 mm)
6-15/16"
(176 mm)
6" (152 mm)
68-7/8" (1749 mm)
48" (1219 mm)
26-3/8"
(670 mm)
1-3/8"
(35 mm)
3-7/8"
(98 mm)
Freestanding Installation
5-9/16"
(141 mm)
Kallista
3
1008431-2-C
