Tools and Materials
Thank You For Choosing Kallista
We appreciate your commitment to Kallista quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kallista.
Before You Begin
Observe all local plumbing codes.
Prior to installation, unpack the new lavatory and pedestal and
inspect them for damage.
Return the lavatory and pedestal to the protective cartons until
you are ready to install.
These instructions are for installing the lavatory to wood frame
construction. For other installations, provide suitable bracing and
fastening devices of sufficient size and strength.
The walls and floor must be square, plumb, and level.
Lavatory dimensions are nominal and conform to tolerances in
ASME A112.19.9 standards for non-vitreous ceramic plumbing
fixtures.
1/2" and 9/16"
Combination
Wrenches
Tape
Measure
Safety
Glasses
Level
Pencil
Plus:
• Common Woodworking
Tools and Materials
• 3/16" Drill Bit
Drill
Square
Pipe
Wrench
1036496-2-A
2
Kallista
