33
GB
Change the temperature
You can change the temperature
using the keys
(1) and
(2). The temperature range goes
from a min. value of 7°C to a
max. value of 40°C.
Once you have chosen the
wished temperature, confirm
your selection pressing the key
(3).
Change the power
Use the key
(1)to select the
power of the stove. The marks
(2) on the display of the remote
control indicate the five possible
powers. Press the key SEND
(3) to confirm your selection.
You will see the words on1-
on2-on3-on4-on5 and the room
temperature on the control
board of the stove according to
the selected power.
You can also select the
automatic
function.
Please
refer to the paragraph on the
Automatic Power Function to
understand how the stove works
in this mode.
Automatic power function
To enter this function, press
the key
(1), until you see
the symbol
on the display.
Press SEND (2) to transmit
your selection. You will read
the word “Auto” and the room
temperature on the control
board of the stove.
When you select this mode, the
pcb will set the working power
automatically according to the
difference in degrees between
the set temperature and the temperature identified by the
sensor on the back of the stove.
Press
, once more, select the wished power and press
SEND to go back to the usual functioning.
1
3
2
1
2
1
2
Set
temper
ature
3
Function TURBO
This function has been developed
in the event you need to heat your
room quickly, for example when you
have just switched the stove on.
When you choose this function, the
stove will work at its max. power for
a period of thirty minutes and the
temperature will be automatically
set at 30°C. After thirty minutes (or
earlier if you give different selections
from the remote control), the stove
will restart working as it did before
you activated the turbo function.
Keep the key TURBO (1) pressed for at least two seconds
to activate this function. You will read the word “TURBO”
(2) on the display of the remote control. Set temperature
and working power will disappear. Press SEND (3) to
transmit the selection to the pcb.
You will read the word “Turb” on the control board on the
upper part of the stove. This word will appear together
with the room temperature and working power set before
activating the function TURBO.
If you want to deactivate this function before thirty minutes
have passed, press the key TURBO (1) once again for at
least two seconds. The word TURBO on the display of
the remote control will disappear and you will see the set
temperature and power again. Press the key SEND (3) to
confirm your selection.
Function ECONO
The function ECONO has been
developed to save money and it is
used when you want to keep the
temperature constant in the room.
This function lets the stove decrease
its working power every 10 minutes
until it reaches the power 1.
Keep the key ECONO (1) pressed
for at least two seconds to activate
this function. You will read the word
“ECONO” (2) on the display of the
remote control. Set temperature
and working power will disappear.
Press SEND (3) to transmit the selection to the pcb.
You will read the word “Econ” on the control board on the
upper part of the stove. This word will appear together
with the room temperature and working power set before
activating the function ECONO.
If you want to return to the standard function, press the
key ECONO (1) once again for at least two seconds. The
word ECONO on the display of the remote control will
disappear and you will see the set temperature and power
again. Press the key SEND (3) to confirm your selection.
3
1
2
3
1
2
