47
EN
Programming menu
Menu 02 SET CLOCK
To access the set clock option, press the “SET” button (3), with the button - (5) scroll through the submenus until MENU
02 - SET CLOCK and with buttons 1 and 2 select the current day. Press the “SET” button (3) to confi rm.
Then use buttons 1 and 2 to set the time and press “SET” (3) to advance to the minutes setting by pressing buttons 1 and
2. By pressing set again it’s possible to access various submenus in order to set the date, day, month, and year. To do so,
repeat the steps indicated above, using buttons 1, 2, and 3.
The following table briefl y describes the structure of the menu, focusing only on those selections which are available to
the user.
Set the current time and date. The device comes equipped
with a lithium battery that allows the internal clock to
operate autonomously for over 3-5 years.
Menu 03 SET CHRONO
Press the “SET” button (3) and then button 5 to arrive at the desired menu; press “SET” (3) to enter.
Enter menu M-3-1 and with buttons 1 and 2 select whether or not to activate the thermostat (on/off), which allows you
to program the automatic ignition of the Stove.
Once the thermostat is activated/deactivated, press button “4” (OFF) and continue scrolling though the submenus using
button 5. Select which submenu you wish to enter in order to access the daily, weekly, and weekend programmes.
To set the ignition times and days repeat the previous steps:
- access the submenu using “SET” (3)
- adjust the days, times, and activation status (on/off) with buttons 1 and 2
- confi rm by pressing the “SET” button (3)
- exit from the submenu/menu with button 4 to turn it off
The following table briefl y describes the structure of the menu, focusing only on those selections which are available to
the user.
level 1
level 2
level 3
level 4
value
03 - set crono
01 - abilita crono
01 - abilita crono
on/off
02 - program. giorno
01 - crono giorno
on/off
02 - start 1 giorno
ora
03 - stop 1 giorno
ora
04 - start 2 giorno
ora
05 - stop 2 giorno
ora
06
Menu 02
menu
clock
menu level
input
dialogue
level 1
level 2
level 3
level 4
value
02 - set clock
01 - day
day of the week
02 - hour
hour
03 - minutes
minutes
04 - day
day of the month
05 - month
month
06 - year
year
Summary of Contents for QUADRA 12D
Page 1: ...USER MANUAL QUADRA 12D...
Page 24: ...54 EN...
Page 33: ...63 EN NOTES Cod 001109...
Page 34: ...64 EN NOTES Cod 001109...
