background image

33

EN

Dear Customer,

We thank you for having chosen one of our products, the fruit of technological experience and of continual research for 
a superior quality product in terms of safety, dependability, and service.
In this manual you will find all the information and useful suggestions to use your product with the maximum safety 
and efficiency.

• Incorrect installation, incorrectly performed maintenance, improper use of the product release the manufacturer from 

every eventual damage derived from the use of the stove.

• The unit cannot be used as an incinerator. Do not use fuels other than pellets.
• This manual has been realized by the manufacturer and constitutes an integral part of the product and must remain 

with it during its entire lifetime. If the product is sold or transferred, be sure that the booklet is present since the 
information contained in it are addressed to the buyer, and to all those persons of various titles who complete the 
installation, use and maintenance.

• Carefully read the instructions and the technical information contained in this manual, before proceeding with the 

installation, use, and any operation on the product.

• The observance of the indications contained in the present manual guarantees the safety of people and the product, 

the economy of use and a longer functioning lifetime.

• Although the carefully studied design and the risk analysis done by our company has permitted the realization of a 

safe product, in any case, before effecting any operation on the stove, it is recommended to keep said manual avail-
able and pay scrupulous attention to the instructions written therein.

• Be very careful when moving the ceramic details where present.
• Check the precise flatness of the pavement where the product will be installed
• The wall where the product will be placed must not be constructed in wood, or in any case, made of an inflammable 

material, and in addition it is necessary to maintain a safety distance.

• While the stove is in operation, several parts of the stove (door, handle, sides) can reach high temperatures. Therefore 

pay attention and use the proper precautions, above all in the presence of children, elderly or disabled persons, and 
animals.

• Assembly must be performed by authorized persons (Authorized Assistance Center).
• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the intent of pursuing a 

policy of constant development and renewal of the product can, without any notice, make any modifications that are 
believed opportune.

•  When the stove is working at its maximum speed, it is strongly suggested to wear gloves while handling with the 

door for pellets loading and the door handle.

• It is prohibited to install in bedrooms or in explosive environments.
• Only use replacement parts recommended by the supplier.

In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fighters if necessary. 
After that contact the Authorized Assistance Center.

Never cover the body of the stove in any way or obstruct the openings placed on the upper side 
when the device is operating. All our stoves are trial lighted on the construction line.

This instruction booklet is an integral part of the product: make sure that it always accompanies the appliance, even in 
case of transfer to another owner or in the case of transfer to another place.

 

In the event of damage or loss, request a 

copy from the area technician.

These symbols indicate specific messages in this booklet:

ATTENTION: 
This warning sign indicates that the message to which it refers should be carefully read and under-
stood, because failure to comply with what these notices say can cause serious damage to the stove 
and put the user’s safety at risk.  

INFORMATION: 
This symbol is used to highlight information which is important for proper stove operation. Failure to 
comply with these provision will compromise use of the stove and its operation will not be satisfactory. 

Quadra 12

Cod. 001109

We highly recommend to turn to our Authorized Service Centre for the installation and the first 
ignition of the device as it not only carries out the installation perfectly but also verifies the re-
gular operation of it.

Summary of Contents for QUADRA 12D





































Reviews: