Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
11
TKG SI 1004 - 130715
Assembly page 11/52
Fax +32 2 359 95 50
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger.
In case of need you should return the appliance to this electrician.
! BEFORE USING THE IRON, remove any labels from the soleplate and wipe any manufacturing
residue from the soleplate using a soft cloth
.
FILLING THE WATER TANK
Use preferably demineralised water. If you want to use the steam dial, fill the water tank as
follows:
1)
Unplug the iron from the outlet to let it cool down and set it horizontally on a stable level
surface.
2)
Put the temperature dial to
"
MIN
" and the variable steam dial to the
setting.
3)
To fill the water tank, open the lid of the filling opening and pour water using
a measuring
cup. Never exceed the MAX mark indicated on the appliance.
4)
When ironing, unplug the appliance before refilling. Fill the water tank by holding the
appliance in horizontal position without putting down the hot soleplate, unless you have a
heat-resistant base.
TEMPERATURE SETTINGS
•
You can choose the temperature setting depending on the cloth to iron.
•
Plug in the iron. Choose the correct ironing temperature by turning the fabric selector
switch. The temperature indicator lights up. Once the desired temperature has been
reached, the temperature indicator lamp will go out.
DRY PRESSING
•
Turn the variable steam dial to position
.
•
Plug in the iron.
•
Set the temperature dial for the desired fabric. Always check the label of the garment
before choosing the temperature setting.
•
Set the iron on its heel rest and wait until the temperature indicator light goes out.
