4
USK DKP 1 - 071214
USE
•
First check that the voltage marked on the product is the same
as your supply voltage.
•
Select a suitable position close to an electric socket, on a dry and
even surface.
•
Make sure the controls are in the OFF position (
MIN
). Plug in.
•
The invisible protective coating must be removed before you can
use the appliance. To do this, set the controls to the maximum
setting and leave switched on for approximately 10 minutes.
Smoke will develop, make sure that the room is ventilated. Switch
off the cooking plates and allow to cool down completely. The
cooking plates are now ready for use.
•
Always use flat-bottomed saucepans, which make good contact
with the cooking plates. The saucepan bases should ideally be of
the same size as the cooking plates.
•
Select the temperature. The cooking plates have a range of
temperatures.
•
Due to the cooking plates’ construction, residual heat will remain
after switching off. This may be used to keep food warm for a
short period.
•
After use, turn temperature dial to "
MIN
" and unplug the
appliance from electrical outlet.
CLEANING AND CARE
•
Before cleaning, unplug and wait for the appliance to cool
down.
•
Wipe with a moistened cloth.
•
Do not clean with any abrasive scouring pad or steel wool, as this
will damage the finish.
•
Do not immerse in water or any other liquid.
