9
USK STP 1 - 070502
touching the hot metal surfaces or leaving your hand in the bursts
of steam.
•
Once the pressing plate has cooled down you can clean the
surface with a damp cloth. DO NOT use any abrasives on the
pressing plate. This pressing plate has a non-stick coating that will
assist in cleaning.
•
The ironing board cover is removable for normal washing. You
can rinse the ironing board cover with mild detergent and warm
water.
SAFETY FEATURES
The multiple function safety features of this appliance turn off electric
power to the heater when the pressing plate has been left against
the ironing board for about 10 seconds. You will hear a warning
beep. If the pressing plate is left in the open (up) position without use
after approximately 15 minutes, the unit will be automatically shut-
off. In either case, to restore the unit, you have to press “ON/OFF”
again.
TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
Steam press cannot
be opened with the
handle
Locking knob is in
locked position
Turn the locking knob
to the unlocked
position
Steam press
becomes warm but
DOES NOT
remove
wrinkles.
Temperature setting
is not high enough for
the fabric
attempted.
Gradually increase
the temperature until
obtaining the desired
results.
Temperature has not
been selected
Make a proper
selection.
Press
DOES NOT
get
warm.
Press is not plugged
into an outlet.
Plug the appliance
in.
