Installation
WARNING!
These appliances must be earthed.
Before installing or replacing the bulb, the appliance must be always being
disconnected from the 220-240V supply.
Patio Heater ZHQ2068H-T is built with the best quality components in accordance to the
prevailing legal regulations and certified for safety in use. For best results from the appliance
please ensure that the installation is done by a qualified electrician in accordance with the
following instructions and taking full account of current regulations. When using the heater,
please carefully follow the instructions and recommendations below.
Connection to 220-240 Volts Power Supply.
• It is important to ensure that the electricity supply is of adequate capacity for the electrical load
required by the appliance being installed.
Minimum required distances:
• 250mm from the side wall
• 500 mm from the ceiling
• Generally heaters must be placed at a safe distance (clear space) of at least 2.0m from
combustible materials and glass walls. If installed in workshops or garages where inflammable
or combustible paints are used, the heaters must be installed at a distance of at least 4.0m from
the source of danger.
• If the heaters are placed in areas where spray painting of any description is taking place, they
should not be used during the painting operations.
• Never use the heater in particularly dusty and explosive areas.
