Control & Function
Regular breaks during operation are essential to maximize the life of this device as it is not designed for continual
use. Always unplug the unit when it is not being used for long periods or before servicing. In the event of serious
operation problems, stop using the unit and contact your dealer immediately.
Note:
There will output from laser 5 seconds after the unit is powered on.
Operation
Standalone pre-program laser show
Press FUNC to enter MODE OPTION.
Till the LED panel shows AUt.
Press ENTER to confirm the setting.
Auto mode
The laser will return to Auto mode once the power is turned off/on.
Sound activated show (Music Show) Standalone mode
Press FUNC to enter MODE OPTION.
Till the LED panel shows SoU.
Press ENTER to confirm and save the setting.
