sure the songs are also on to the USB storage device. Save the playlist in root. FADER select the type of switch in
the mixer for FADER START wire remote control. TITLE press this button to show TITLE, ALBUM, or ARTIST.
7. PROG
The maximum number of tracks which you can edit are 99.
1. Press and hold TRACK/ENTER to set a program list in either Play or in Pause mode. When the music is in Play,
press BACK to select the track in this folder. To go to another folder, press BACK again to browse to it.
2. Press PROGRAM and then press TRACK/ENTER to let the program list ready to play.
3. Press Play/Pause to start the program playback.
4. Press and hold the Program button can delete the program list.
a. Under program playback, deleting the program list will jump to the USB port selection.
b. Under normal playback, deleting the program list will not affect the music playing.
If no program list exists, pressing PROGRAM will show “empty”.
8. MT.
When this function is on, they key of the song is locked even if the pitch fader is adjusted.
9. PITCH BEND (+/-)
Press “+” to increase the speed. Press “–” to decrease the speed.
10. PITCH (8%, 16%)
The pitch range can switch between 8% and 16%. The function can also be turned off by
pressing the button so the LED does not light up.
11. PITCH CONTROL SLIDER
To match the beat of another track, move the slider up and down to change the
speed. The range of the pitch control slider can also be changed by pressing the PITCH button.
12. CUE
When in PAUSE mode, press the CUE button to set the CUE point (after pressing this button to set the new
cue point, the stutter will be eliminated). When in PLAY mode, press this button to pause the music at the
memorized point. Also under PLAY mode, press and hold this button to play from the memorised point. Once
released, the playback will pause and return to the memorised point.
13. BACK
This function allows you to go back to the previous setting that was entered. When the track is in play,
pressing BACK will not interrupt the music. This is for browsing and selecting other track, folder and partition. In
this mode, you can check the next track you would like to play or make the program list. For viewing the current
track information, press it for 3 seconds.
14. PLAY/PAUSE
Pressing this button will play the music and pressing it again will pause the music.
15. SEAMLESS LOOP (A, B/EDIT, RELOOP/EXIT, AUTO LOOP)
1. A lights up after setting a start point. Press button B/EDIT for an endpoint, the loop playback starts
automatically. To exit the loop, press the RELOOP/EXIT button. RELOOP goes back to the previous loop setting or
exits the setting.
2. During loop playback, press B/EDIT again to enter loop-trimming mode. Use the jog wheel to lengthen or
shorten the loop.
3. The AUTO LOOP function can set a loop with many beat ranges. Press this knob to get the auto loop ready.
Setting A can form a loop according to the preset beat range. Also, press and hold AUTO LOOP, scroll the
TRACK/ENTER to enlarge or shorten the loop length when the loop playback is going.
4. When forming a manual loop, press and hold AUTO LOOP and turn TRACK/ENTER to change the loop length.
When presetting the beat range for Auto Loop, the display will show the beat number.
When the loop in play and using wheel or Track/Enter to trim the beat length, the display shows loop with arrow
sign to indicate the length is enlarged or decreased.
16. TAP and AUTO BPM
Pressing this button in time with the beat will match the BPM (beats per minute) of the
music. Pressing and holding the button will switch between auto BPM and manual BPM.
17. POWER ON/OFF
This turns the unit on and pressing it again turns the unit off.
18. RELAY
Press the RELAY button to activate. When one source is in PLAY mode and the other is in PAUSE mode
and the playing unit is paused the other unit will automatically start to play.
3
