Trouble shooting
Symptom
Solution
No Power
Check mains power.
Check external fuse.
Check internal fuse.
No smoke output
Check fluid level.
Check remote.
If using wireless remote contol, check batteries.
Breaker/fuse keeps blowing
Possible electrical short. Contact retailer/distributor for further instructions.
Low smoke output
Run a cleaning solution through the smoke machine.
Check that the smoke machine is plugged into the correct voltage.
Smoke machine is not heating up
Check the external fuse.
Check the internal fuse.
Possible faulty part. Contact your retailer/distributor for further instructions.
Remote control does not work
Make sure connector is firmly connected to device.
Check batteries in remote control.
Possible faulty controller. Try using another controller.
Check the internal fuse.
Check the external fuse.
Fluid indicator states no smoke
but the container if full
Try resetting the smoke machine by turning the power off and then on again.
Possible faulty part. Contact retailer/distributor for further instructions.
Specifications and features
Model
Kam KSM2000
power supply
230V AC - 50Hz
Real power
2000w
Fuse
F7A
Re-heat time
3 minutes
Output
24,000 CuFt per minute (approx)
Tank capacity
2.5 litres
Timer remote
Yes
Wireless remote
Yes
Gross weight
7.32kg
