KWM1935 - front panel
1.
Power switch
2.
Channel selector panel (see below for channel selection instructions)
3.
Power status LED
4.
RF signal indicator led - lights when the receiver is receiving a signal from the transmitter.
5.
Volume control
KWM1935 - rear panel
6.
Power inlet
7.
Squelch sensitivity adjust. The squelch circuit automatically mutes the audio signal if momentary signal loss
occurs.
8.
Unbalanced audio output
9.
Balanced XLR audio output
KWM1940 – front panel
1.
Power switch
2.
Channel selector panel (see below for channel selection instructions)
3.
Power status LED
4.
Channel A RF signal indicator LED – lights when the receiver is receiving a signal from the transmitter.
5.
Channel B RF signal indicator LED – lights when the receiver is receiving a signal from the transmitter.
6.
Mic A volume control
7.
Mic B volume control
KWM1940 – rear panel
8.
Power inlet
9.
Channel A squelch sensitivity adjust. the squelch circuit automatically mutes the audio signal if momentary
signal loss occurs.
10.
Channel B squelch sensitivity adjust.
11.
Unbalanced combined audio output - outputs the combined audio signal from both microphones.
12.
Channel A balanced XLR audio output.
13.
Channel B balanced XLR audio output.
5
1
2
4
6
8
7
3
9
5
1
2
4
6
8
7
3
9
10
11
12
13
