Receiver front panel
Handheld microphone transmitter
(if applicable)
1. Power On/Off switch
12. Illuminated display screen
2. Selection buttons (up/down)
13. Infrared connect window (ACT)
3. Set button
14. Mic power On/Off switch
4. Illuminated display screen
15. Compartment for 2 x AA 1.5V batteries
5. Infrared connect window (ACT)
Bodypack transmitter
(if applicable)
Receiver rear panel
16. Mic/guitar/instrument input socket
6. Channel B antenna socket
17. Volume control
7. Channel B balanced XLR socket for audio output
18. Power On/Off switch
8. Channel A balanced XLR socket for audio output
19. Power indicator
9. Unbalanced 6.35mm jack socket for mixed
20. Flexible transmitter antenna
audio output from both channels
21. Illuminated display screen
10. DC power supply input socket
22. Infrared connect window (ACT)
11. Channel A antenna socket
23. Compartment for 2 x AA 1.5V batteries
Receiver illuminated display screen
The transmitter battery level indicator can be found in the lower left of each half of the display (next to the ACT IR
icon). This shows how much battery power is left in your mic/bodypack transmitter. Always check this battery level if
you are having trouble connecting your mic/bodypack transmitter. When the lock indicator is lit, the controls are
‘frozen’ to avoid accidental changes. To unlock, simply press and hold the Set button (2.). For further instructions on
the display please read below.
