Example
Using 2 receivers (4 transmitters)
1.
CH1 863.00
2.
CH2 863.80
3.
CH3 864.40
4.
CH4 865.00
CHA 863.00
CHB 863.50
CHA 863.00
CHB 863.10
The channel spacing should be at least 500 MHz apart.
Volume
Do not touch the menu button. Use buttons 3 & 5 to increase or decrease the volume output of the microphone.
Each microphone has its own individual volume adjustment.
Specification
Comprehensive performance
Carrier frequency options
UHF 863.00-865.00 MHz / UHF 606 -614Mhz
Frequency stabilisation
Less than ±30ppm
Dynamic range
More than 90dB
Total harmonic distortion
Less than 0.5%
Frequency response
40Hz-15KHz±3dB
Audio output level
0--±400mV
Fixed receiver
Power supply
DC17V 300MA
Consume power
4w
Signal /noise ratio
More than 90dB
Image & spurious rejection
More than 80dB
Border upon channel rejection
More than 80dB
Receiving sensitivity
Less than 10dBuV (SINAD=30dB)
De-emphasis
50us
Handing microphone
Transmitter power
8.5mW
Modulation type
FM, F3F
Max deviation
±25KHz
Spurious emission
More than 40dB (with carrier)
Battery voltage
1.5V x 1
Continuous using
5 hours approx
Bodypack
Transmitter power
10mW
Modulation type
FM
Max deviation
±40KHz
Spurious emission
More than 40dB (with carrier)
Battery voltage
1.5V x 1
Continuous using
5 hours approx
Note:
battery times are approximate and will vary depending on battery quality and conditions. For the best
performance always use high quality branded batteries.
