Number Feature
Function
1
Function setting LED
Displays the current operating mode.
2
Function buttons
Menu buttons to control the operating mode of the laser.
3
Microphone
Mic for Sound-to-Light operation.
4
DMX output
3 pin XLR connector for DMX512 output communication.
5
DMX input
3 pin XLR connector for DMX512 input communication.
6
Power supply output
Mains supply output for linking power to other units.
7
Power supply input
Attach the mains cable here. Built-in fuse.
8
Cooling vents
Do not cover.
Function setting
Using the four function buttons on the rear of the unit you can set the operating mode of the Powercan. Press the
Menu
button to
display the different functions (see table below for a description of the functions). Use the
Up
or
Down
arrow buttons to make
your selection. When you have chosen your desired mode, press the
Enter
button to confirm the change.
DMX operation
Menu display
Function
Addr
DMX address setting. This is changed using the
Up
or
Down
arrow buttons (1-512).
CHNd
3CH - press the
Enter
button to choose 3 channel DMX operation.
7CH - press the
Enter
button to choose 7 channel DMX operation.
NAnu
rEd - press the
Enter
button / 0-255 red dimmer.
GrEE - press the
Enter
button / 0-255 green dimmer.
bLUE - press the
Enter
button / 0-255 blue dimmer.
SHOU
SH1 - SH7. Built-in shows.
COLO
CO1 - CO7. Manual colour selection.
SPEE
Auto speed setting from 01-99.
Auto
Auto mode.
Soun
Sound-to-Light mode. Press the
Enter
button to choose the sensitivity of the microphone (S01-S10).
Temp
The LED output power will reduce when the unit’s temperature increases towards 50°C.
Ve1.0
Software version Ve1.0
DMX channel
Value
Function
3 channel
7 channel
-
CH1
0-255
Dimmer
CH1
CH2
0-255
Red dimmer
CH2
CH3
0-255
Green dimmer
CH3
CH4
0-255
Blue dimmer
-
CH5
0-255
Strobe
-
CH6
0-10
Disabled
-
11-240
Single effect built-in program in Auto mode
-
241-250
Built-in program in Sound-to-Light mode
-
251-255
Mixed effect built-in programs in Auto mode
-
CH7
0-255
Auto speed