10
Kamasa Tools is a trade mark of KG Knutsson AB, SE 191 81 Sollentuna, Sweden, Phone +46 8 92 30 00 www.kamasatools.com
inserting and removing bits
To remove a bit, turn the “A”part by counter clockwise.
To insert a bit, turn the “A” part by clockwise.
Forward/reverse selection button
Press the button to select the direction.
High/Low speed selection
Use the “High” for drilling application.
Use the “Low” form screwdriver application.
Select the applied torque
Use the 17 sections adjustment ring to select the
right torque for your application.
Drill mode
Turn the torque ring to the sign for the maximum
torque position if you would like to drill on wood.
replacement of the chuck
1. Turn chuck counter clockwise until it is fully open
2. Release the left hand screw inside the chuck
Turn counter clockwise
Insert the bit
Remove the bit
Turn clockwise
