background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use. 

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

Ceramic Heater

• 

Avoid touching heater body while it is on, 

some parts of the heater are hot. When 

moving the unit switch off and hold the 

heater by the handles where provided.

• 

 Keep combustible materials such as 

drapes and other furnishings at least 1.7 

metres from the front, sides and rear of 

the heater. Do not use heater to dry your 

laundry.

WARNING:

 In order to 

avoid overheating do 

not cover the heater.

• 

Extreme caution and supervision is 

necessary when this heater is used by or 

near children, invalids or animals.

• 

This appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience and 

knowledge, unless they have been given 

supervision or instruction concerning use 

of the appliance by a person responsible 

for their safety. 

• 

Children should be supervised to ensure 

that they do not play with the appliance.

• 

 Important – this heater is intended for 

floor use only. 

• 

 Do not mount on ceiling or walls.

• 

Do not leave heater unattended. Always 

switch off the heater at the controls and 

at the power outlet then unplug heater 

from the power outlet when not in use.

• 

 Do not operate heater whilst asleep.

• 

Do not operate any heater with a 

damaged cord or plug, or if heater 

has been dropped or damaged in any 

manner. Return heater to your nearest 

service centre for examination, electrical 

or mechanical adjustment or repair.

• 

Do not use outdoors. This heater is not 

intended for commercial use, such as 

construction sites.

• 

 Do not locate the heater immediately 

below a socket outlet when in use.

• 

Do not use this heater with a programmer, 

timer or any other device that switches 

the heater on automatically. Since a fire 

risk may exist if the heater is covered or 

positioned incorrectly.

• 

This heater is not intended for use in wet 

or moist locations. Do not use this heater 

in the immediate surroundings of a bath, 

a shower or a swimming pool. Do not 

immerse or allow liquids to be spilt on 

heater.

• 

 This heater has hot and arcing or 

sparking parts inside. Do not use in areas 

where petrol, paints, aerosols, or other 

inflammable substances are used or 

stored.

• 

 Do not operate the heater with the 

power cord damaged, frayed or split, 

wound around any part of the heater, or 

in contact with heated surfaces of the 

heater.

KCE520_IB_FA.indd   4

12/10/09   12:10 PM

Summary of Contents for KCE520













Reviews: