9
Fig. 3
NOTE:
When positioning the
rear grille on the motor shaft,
always ensure the carry handle
on the grille is positioned in the
upright position.
5. Slightly loosen the securing screw
located on the back of the fan
blades so you can insert the
blades onto the motor shaft.
Make sure blades are inserted
onto the motor shaft with the
securing screw side facing the
rear grille. Align the screw with
the groove in the motor shaft.
Once the screw is aligned with
the motor shaft, tighten the screw
making sure the fan blades are
secure to the motor shaft and the
blade are able to move freely
(See Fig.4).
Fig. 4
6. Loosen the small screw at the
bottom of the front grille by hand.
Locate the positioning tab on the
top end of the front grille and slot
into the top of the rear grille.
7. Thread the screw through the
small holes at the bottom of
both the front and rear grilles
and loosely secure the screw
using the nut provided.
Secure the front and rear grilles by
snapping shut the securing clips
over the edges of both grilles
(See Fig. 5).
Fig. 5
8. Tighten the small screw and nut
together (See Fig. 6).
Fig. 6
