Kambrook KSK220, Instruction Booklet

7

Using Your Kambrook Profile 1.7L Kettle

Before First Use

Remove any packaging material and 

promotional labels before using your 

kettle for the first time. 
It is recommended before the first use 

to fill the kettle to the maximum level 

with cold tap water, bring to the boil 

and then discard the water. Your kettle 

will only operate when positioned 

on the power base with the ON/OFF 

switch in the ‘ON’ position. The kettle 

will automatically switch off once the 

water has boiled.

Operation Of Your Kettle

1.  To fill the kettle with water, remove 

it from the power base and open 

the lid by pressing the button on 

the handle of the kettle and the lid 

will lift upwards. Fill with the desired 

amount of water. Do not operate 

the kettle without water. Always fill 

the kettle between the minimum 

and the maximum marks on the 

water window. Too little water will 

result in the kettle switching off. 

2.  Ensure that the lid is closed  

before placing the kettle on  

the power base.

3.  Place the kettle firmly onto  

the power base and plug the 

power cord into a 230V or 240V 

power outlet and switch on.

4.  Press the ON/OFF switch to the  

‘ON’ position. The power ‘ON’ light 

will illuminate.

NOTE:

 Never operate the kettle 

dry - too little water will result in the 

kettle switching ‘OFF’.
Do not overfill the kettle - filling 

above the maximum mark on the 

water window may result in boiling 

water splashing from the kettle.

NOTE:

 This kettle must only 

be used with the power base 

supplied. Use caution when 

pouring water from your kettle, 

as boiling water will scald. Do 

not pour the water too quickly.

NOTE:

 Do not remove the kettle 

from the power base during 

operation. Ensure the kettle has 

switched to the ‘OFF’ position 

after the water has boiled 

before removing the kettle from 

the power base.

5.  The kettle will automatically switch 

‘OFF’ once the water has boiled. 

Lift the kettle from the power base 

and pour the water. Take care to 

hold the kettle level, especially 

when filled to the maximum level. 

To re-boil it may be necessary to 

wait for a few seconds to allow the 

control to reset.

6.  The kettle should be stored on  

its power base when not in use.  

The power outlet should be 

switched off and the power cord 

unplugged from the power outlet 

when not in use.